+ Reply to Thread
Results 1 to 4 of 4

Thread: Sector Selection / Robot comparison, part 2 (need opinion on rule addition for the test)

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Long Island, New York
    Posts
    515

    Continuing XLK

    Currently XLU is listed as my selected sector, but I'm still in XLK. Per the parameters I've set for the test, then, I'm continuing to hold XLK.

    Also, I've entered the new IWM Robot price.

    I'm glad the Robot is continuing the long setting, because I have not yet worked out the parameters for a stop/reverse on the Robot when a selected sector was not also stopped out.

    One possibility would be to use Billy's lowest short price as an exit for a long position, but I also remember several months ago that Billy said such price "targets" significantly underperformed stops.

    The other possibility would be to simply exit at the previous day's closing price as I set up for the next shorting opportunity.

    The issue WILL come up again. Whatever I set up as the rule will hold through the test.

  2. #2
    Join Date
    Dec 1969
    Location
    Brussels, Belgium
    Posts
    1,999
    Quote Originally Posted by Timothy Clontz View Post
    One possibility would be to use Billy's lowest short price as an exit for a long position, but I also remember several months ago that Billy said such price "targets" significantly underperformed stops.

    The other possibility would be to simply exit at the previous day's closing price as I set up for the next shorting opportunity.

    The issue WILL come up again. Whatever I set up as the rule will hold through the test.
    Tim,

    If your goal is to use the IWM robot signals on the other ETFs for testing potential outperformance with your system, I would indeed hold the XLK position with a trailing stop like you do now as long as the robot remains long, even if IWM is stopped out. XLK is currently giving an edge and it must be exploited. You may continue to use the indicative stop % that I send you, but be very careful never to lower your stop from any previous day. The correct trailing stop on XLK is yesterday's close minus today's % stop or 1.81%. If XLK closes higher today, you may raise the trailing stop at today's close minus the % stop stop that I'll send tomorrow morning. You only raise the stop when the latest close minus % stop rise from the previous stop level.
    Once the IWM robot issues a short signal, I would exit XLK on next day's open, because the signal can only be issued EOD after the close.
    Billy

  3. #3
    Join Date
    Dec 1969
    Location
    Long Island, New York
    Posts
    515

    Thanks!

    I think you've answered all of my questions (especially since I've been a little fuzzy on the trailing stops). Appreciate all the help, Billy.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts